15
FASTCAM Nova
1
.3
In
pu
t
/
O
u
tp
u
t
S
ig
na
l T
yp
e
s
1.3.2.
INPUT 1/2
The effect when a signal is input is described below, and can be optionally selected and
set.
The input voltage is 0V to +12V (H level +3.3V to +12V), positive or negative polarity,
pulse width is 200 ns or greater.
Default settings are INPUT1 connector is assigned “SYNC POS”, INPUT2 connector is
assigned “TRIG POS”.
Menu Display
Contents
Signal
(Input Signal Conditions)
TRIG POS
Inputs a positive polarity trigger signal.
FET Input 0V
-
+12V (H
level +3.3V to +12V),
Positive Polarity
TRIG NEG
Inputs a negative polarity trigger signal.
FET Input 0V
-
+12V (H
level +3.3V to +12V),
Negative Polarity
READY POS
Inputs a positive polarity READY signal.
By inputting in the live state, switch
READY ON / OFF.
In addition, by inputting while
recording, cancel the recording state.
FET Input 0V
-
+12V (H
level +3.3V to +12V),
Positive Polarity
READY NEG
Inputs a negative polarity READY
signal.
By inputting in the live state, switch
READY ON / OFF.
In addition, by inputting while
recording, cancel the recording state.
FET Input 0V
-
+12V (H
level +3.3V to +12V),
Negative Polarity
SYNC POS
Inputs the signal with positive polarity.
Input the synchronization signal from
the camera or external device.
FET Input 0V
-
+12V (H
level +3.3V to +12V),
Positive Polarity
SYNC NEG
Inputs the signal with negative polarity.
Input the synchronization signal from
the camera or external device.
FET Input 0V
-
+12V (H
level +3.3V to +12V),
Negative Polarity
EVENT POS
Input the signal with positive polarity.
By inputting during recording, "Event
marker" is displayed separately from
the trigger point in the data after
recording.
FET Input 0V
-
+12V (H
level +3.3V to +12V),
Positive Polarity
EVENT NEG
Input the signal with negative polarity.
By inputting during recording, "Event
marker" is displayed separately from
the trigger point in the data after
recording.
FET Input 0V
-
+12V (H
level +3.3V to +12V),
Negative Polarity
Summary of Contents for FASTCAM Nova
