14. General Operating Guidelines
14.1. Activating the IR light
WARNING
When the IR light is activated, the emitted light can be detected by other image intensifying equipment.
NOTES
- The Infra-red (IR) light is not visible to the naked eye.
- The use of a 935 nm IR diode will make it hardly visible for user’s whit tubes Gen III
- To activate the IR light, proceed as follows:
a.
Turn the operation switch to IR position.
b.
Make sure that a red LED illuminates in the field of view in the left arm, this indicates that the
IR light is active.
14.2. Low battery indication
If a green LED light illuminates in the field of view of the right arm, indicate that the battery is near to be
empty, in this condition, the battery must be replaced as soon as possible.
NOTE
-The battery in this condition will allow approximately 30 minutes of operation.
15. Head-Mounted Operation
Head mounted operation refers to using of the
PD-PRO-16B
along with a head mount (option), helmet
mount (option) or diver’s mask (option).
15.1. Ergonomic Head Mount
The new ergonomic head mount allows the use of the same BINOCULAR helmet adapter.
Figure 12 Ergonomic Head Mount
p. 17
Summary of Contents for PD-PRO-16B
Page 1: ...User s Manual PD PRO 16B Night Vision Binocular Night Vision...
Page 2: ...Night Vision p 2...
Page 24: ...NOTES Night Vision p 24...
Page 25: ...p 25...
