11. External battery pack connection (optional)
WARNING
Never use external and internal batteries together.
An external battery pack can be connected to power the system.
a.
If the system is powered with the external battery pack, make sure that the internal battery is
not
installed.
b.
Remove the two battery caps in the external battery pack.
c.
Make sure the two compartments of the batteries are clean and dry.
d.
Make a note of the polarity indicated on the side of the battery pack and install a battery in
each
compartment.
e.
Put the two-battery caps back into position at the batterie compartments.
f.
Connect the battery pack to the
PD-PRO-16B
using the proper wire.
Figure 11 External Battery Pack Interconnection
Make sure that there is not battery installed on the goggle when powering the system using the external
battery pack.
Never connect the external battery pack while there is a battery installed in the goggle battery holder
12. Preparation for Use
a.
Remove the
PD-PRO-16B
from the carrying case, or pouch.
b.
Examine the
PD-PRO-16B
for damage. If damage is found return the
PD-PRO-16B
to a
suitable maintenance facility.
c.
Make sure that the operation switch is set to OFF.
d.
Make sure that all lenses are clean.
e.
Install a battery (see paragraph 2.3) or connect the external battery pack (see paragraph 2.4).
f.
With the objective protective covers on, turn the operation switch to ON position to check function.
13. Stand Alone Operation
(Without Head mount or Helmet Mount)
a.
When the
PD-PRO-16B
is removed from the head mount or helmet mount and the main
switch are at position ‘OFF/M’, the magnetic switch automatically turns the unit off.
b.
To operate the
PD-PRO-16B
as a stand-alone device, turn the operation switch to the “ON” position.
Night Vision
p. 16
Summary of Contents for PD-PRO-16B
Page 1: ...User s Manual PD PRO 16B Night Vision Binocular Night Vision...
Page 2: ...Night Vision p 2...
Page 24: ...NOTES Night Vision p 24...
Page 25: ...p 25...
