© PSI (Photon Systems Instruments), spol. s r.
o.
23
10
FLUORPEN SOFTWARE
10.1
SOFT WARE INSTALLATIO N
1.
Save the FluorPen software provided on the USB flash disk to your computer and launch the FluorPen program.
2.
To connect and recognize your N-Pen device in the FluorPen software proceeds first with the registration of your
FluorPen software (Fig. 10).
•
Select: Help > Register
•
Enter: your serial registration number.
•
Select: OK
Fig. 10 Software registration.
Please note that you will find your serial (registration) number in the file
SN.txt
, which is
included on the enclosed USB flash disk.
Please remember: it is not possible to download data from the N-Pen device without
software registration.
3.
Switch on the N-Pen and enable Bluetooth or connect USB cable to the PC.
4.
Make sure that your PC and the N-Pen are properly paired (see chapter 9 for complete information on USB and
Bluetooth pairing).
5.
Select:
Setup > Device ID (Ctrl+I)
. If properly connected, the message “Device:
N
Pen” appears in the bottom part
of the screen (Fig. 11).
Summary of Contents for N-Pen N 110
