Photon Focus MV2-D1280-640, User Manual, Page: 57 / 85

6.3.1 Manual Driver Installation (only USB 2.0 Model)
If Windows did not automatically install the driver for your USB camera, please proceed as
follows:
• Open the Device Manager in the Windows Control Panel.
• There will be an unknown device called "Silicon Software GmbH microUSB2".
• Right click on the unknown device and choose "Update driver".
• The hardware update wizard will appear. It is not necessary to allow the search for current
and updated software on the Internet. Click on "No, not this time" and "Next".
• Then choose "Install the software automatically (Recommended)" and proceed with
"Next".
• When you get asked about the driver location, specify
\Photonfocus\microDisplayUSB\driver .
This procedure applies to Windows XP and Service pack 2.
6.3.2 DLL Dependencies
Several DLLs are necessary in order to be able to communicate with the cameras:
• PFCAM.DLL : The main DLL file that handles camera detection, switching to specific camera
DLL and provides the interface for the SDK.
•
’CAMERANAME’.DLL
: Specific camera DLL, e.g. mv_d1024e_40.dll.
• COMDLL.DLL : Communication DLL. This COMDLL is not necessarily CameraLink specific, but
may depend on a CameraLink API compatible DLL, which should also be provided by your
frame grabber manufacturer.
•
CLALLSERIAL.DLL
: Interface to CameraLink frame grabber which supports the clallserial.dll.
• CLSER_USB.DLL : Interface to USB port.
More information about these DLLs is available in the SDK documentation [SW002].
6.3 Installation Notes 55