Photon Focus MV2-D1280-640, User Manual, Page: 15 / 85

3
Product Specification
3.1 Introduction
The MV2-D1280-640 CMOS camera from Photonfocus is aimed at demanding applications in
industrial image processing. It provides an exceptionally high frame rate of up to 488 fps at full
resolution of 1280 x 1024 pixels. The camera is built around the MT9M413 CMOS image sensor,
developed by Micron. The principal advantages are:
• 488 frames/sec at full resolution of 1280 x 1024 pixels
• Low power consumption at high speeds
• Resistance to blooming
• Ideal for high speed applications: global shutter, in combination with selectable read out
window: Region of Interest (ROI) or Multiple Regions of Interest (MROI)
• Shading correction for superior image quality
• 10 to 8 bit Look-Up table (LUT)
• Software is provided to set camera parameters and store them within the camera
• The camera has a digital CameraLink Full interface
• Image preprocessing is available as an option
The general specification and features of the camera are listed in the following sections.
3.2 Feature Overview
Item Description
Interfaces CameraLink full configuration
Camera Control PFRemote (Windows GUI) or programming library
Configuration Interface CLSERIAL (9’600 baud or 57.6k baud user selectable)
Trigger Modes Interface Trigger / I/O Trigger
Exposure Time Defined by camera or trigger pulse width
Features Shading Correction (Offset and Gain)
Grey level resolution 8 bit (internal 10 bit)
Region of Interest (ROI) and Multiple Region of Interest (MROI)
Look-up table (10 to 8 bit) / Decimation
Trigger input / Strobe output with programmable delay
Test pattern: LFSR and gradient (ramp)
Table 3.1: Feature overview (see Chapter 4 for more information)
13