4.12 Special Adjustable Setpoints
The inverter has field adjustable function,such as trip points,trip times, reconnect times,active and invalid of QU curve,PU curve.
It is adjustable through special software ,if you want to use it ,please contact with after sales.
The methods document of using the software can download from website or contact with after sales.
PC Series inverter has no LCD screen, it can be controlled via the APP software
(Phonocube). For iOS System, please go to AppStore to search for "Phonocube", then
download and install it. For Android System, please go to google play to search for
"Phonocube", then download and install it. Besides, it can be also installed by scanning
the QR code on the back cover of this manual .
When PC hybrid inverter is working, please use mobile devices to select the SSID of
inverter (Factory defaults is Solar - Wi-Fi, and initial password is 12345678. If any
questions, please refer to Wi-Fi Configuration). After accessing inverter's Wi-Fi network,
you can open the App then configure and monitor the PC system.
5 Phonocube Illustration
4.11 Special Back-up
Connection
If need maintainance on PC, then just switch SP3T to position 3 as shown above. Thus the loads will be supplied by grid (loads
supply will not be cut off).
Back-up
On-grid
The PV Auto Test function of CEI is integrated in Phonocube App. For the detailed operation of this function, please check
instructions on Phonocube App.
6 CEI Auto Test/Power limit function Introduction
17
18
1
2
3
SP3T
1:Loads is supplied from back-up side
2:Loads is not powered
3:Loads is supplied from grid side
7 LED Lights Illustration
SYSTEM
BACK-UP
COM
BATTERY
GRID
ENERGY
Wi-
FAULT
Fi
ON = SYSTEM IS READY
BLINK = SYSTEM IS STARTING UP
OFF = SYSTEM IS NOT OPERATING
ON = BACK-UP IS READY / POWER AVAILABLE
OFF = BACK-UP IS OFF / NO POWER AVAILABLE
ON = BATTERY IS CHARGING
BLINK 1 = BATTERY IS DISCHARGING
BLINK 2 = BATTERY IS LOW / SOC IS LOW
OFF = BATTERY IS DISCONNECTED / NOT ACTIVE
ON = GRID IS ACTIVE AND CONNECTED
BLINK = GRID IS ACTIVE BUT NOT CONNECTED
OFF = GRID IS NOT ACTIVE
ON = CONSUMING ENERGY FROM GRID / BUYING
BLINK 1 = SUPPLYING ENERGY TO GRID / ZEROING
BLINK 2 = SUPPLYING ENERGY TO GRID / SELLING
OFF = GRID NOT CONNECTED OR SYSTEM NOT OPERATING
ON = Wi-Fi CONNECTED / ACTIVE
BLINK 1 = Wi-Fi SYSTEM RESETTING
BLINK 2 = Wi-Fi ROUTER PROBLEM
BLINK 4 = Wi-Fi SERVER PROBLEM
OFF = Wi-Fi NOT ACTIVE
ON = FAULT HAS OCCURRED
BLINK = OVERLOAD OF BACK-UP OUTPUT / REDUCE LOAD
OFF = NO FAULT
SYSTEM
BACKUP
-
COM
BATTERY
GRID
ENERGY
Wi-Fi
FAULT
INDICATOR
EXPLANATION
STATUS
Green
B
lue
Y
ellow
R
ed
Green
B
lue
B
lue
Y
ellow
ON=BMS AND METER COMMUNICATION OK
BLINK1= METER COMMUNICATION OK, BMS
COMMUNICATION FAIL
BLINK2= BMS COMMUNICATION OK, METER COMMUNICATION FAIL
OFF= BMS AND METER COMMUNICATION FAIL
The Power limit function can be set by Phonocube APP. For the detailed operation of this function, please check
instructions on Phonocube App.
Summary of Contents for PC3.0A1-S
Page 1: ...340 00xxx 00 PC...
