7
EN
VM407
CONNECTION TO SMARTPHONE OR OTHER DEVICES
ANALOGUE MODE
SIRI/ALEXA VOICE COMMANDS/Google Assistant
- Connect the headphones to the device as described in the section “CONNECTING TO A SMARTPHONE OR OTHER DEVICE”.
- Start playing the files on the device using your favourite APP, e.g. Spotify, iTunes, AppleMusic, Youtube, etc..
You can now manage your audio tracks directly from the headphones:
Play/Pause = briefly press the multifunctional button (3).
Next track = press the - button (5).
Previous track = press the + button (4).
Turn down the volume = press and hold the - button (5) until the “beep” signal sounds and repeat until the desired volume is
reached.
Turn up the volume = keep the + (4) button pressed until the “beep” signal and repeat until the desired volume is reached.
LISTENING TO MUSIC and AUDIO FILES
Connect the headphones to the smartphone as described in the section “CONNECTION TO SMARTPHONE OR OTHER DEVICES”.
STARTING A CALL
- Start the call as usual on the smartphone.
You can now manage the call directly from the headphones:
End call = briefly press the multifunction key (3).
Lower the volume = press and hold the - button (5) until the “beep” signal sounds and repeat until the desired volume is reached.
Increase the volume = keep the + button (4) pressed until the “beep” signal sounds and repeat until the desired volume is reached.
ANSWERING A CALL
Answer a call = briefly press the multifunction button (3).
End a call = briefly press the multifunction key (3).
Lower volume = press and hold the - button (5) until the “beep” signal sounds and repeat until the desired volume is reached.
Increase the volume = keep the + button (4) pressed until the “beep” signal sounds and repeat until the desired volume is reached.
CALLS
- Turn on the VM407 headphones with the multifunctional button (3).
- Activate Bluetooth on the device you want to connect:
smartphone, tablet or other Bluetooth 4.1 A2DP and AVRCP device.
To activate Bluetooth on your device, please refer to the instruction manual of your device.
- Select BT80 on your device.
If a warning appears on your device press “confirm/ok” to proceed.
If you are prompted for a pairing code on your device enter “0000” and confirm to proceed.
- During pairing the headphones LEDs will flash red and blue.
- Once paired, the LEDs will flash BLUE (Standby) until the audio signal is received from the connected device.
- Start playing music/audio books/audio files on the connected device to start listening with the headphones.
During transmission, the LEDs will remain lit in BLUE.
CONNECT THE HEADPHONES TO ANOTHER DEVICE
- Turn off the Bluetooth function on the previously paired device.
- Turn the headphones off and on again.
- Activate Bluetooth on the new device to be connected and repeat the above procedure.
WHEN THE HEADPHONES ARE TURNED ON, THEY WILL AUTOMATICALLY CONNECT TO THE LAST CONNECTED DEVICE.
To use the headphones in analogue mode, simply connect them to your device or laptop with the supplied 3.5 jack cable.
In this case, the headphones do not need to be turned on and can be connected even when the battery is low.
The volume and playback of songs must be controlled directly on the device or laptop.
NB. only for devices enabled for voice commands
- Connect the headphones to the device as described in the paragraph “CONNECTION TO SMARTPHONE OR OTHER DEVICES”.
- Press the multifunction button (3) for 2 seconds to activate the microphone and speak.
