12
13
Stability / Reliability / Creativity
(Version EN-W-SM-2015-V1)
Phono Solar Standard PV Modules with the Model Names covered under this warranty are:
PSXXXM-24/F (XXX = 180, 185, 190, 195,200,205,210)
PSXXXM-20/U (XXX = 230,235,240,245,250,255,260,265,270)
PSXXXP-20/U (XXX = 230,235,240,245,250,255,260,265)
PSXXXM-24/T (XXX = 280,290,300,310,320,330)
PSXXXP-24/T (XXX = 280,290,300,310,320,330)
The product (hereinafter the “Product”) in this Warranty means the Standard PV Module(s)
manufactured by Phono Solar Technology Co., Ltd. (hereinafter the “Phono Solar”). The
Phono Solar warrants its Product(s) in compliance with the terms and conditions as
stipulated below.
The Customer in this Warranty means the individual person or company who purchases
Phono Solar Product.
This “Limited Warranty for PV-Modules“ is valid for all Standard Modules delivered from
Phono Solar since January
1
st
, 2015
Phono Solar warrants that the Product including factory-assembled DC connectors and
cables, if any, will be free from defects in material and workmanship under normal
application, installation, operation, use and service conditions. If Product fails to
conform to this warranty, within a period of ten (10) years from the date of delivery
by Phono Solar to its first buyer, Phono Solar will, at its sole discretion, either
repair the defective Product(s) at no charge; or replace the defective Product(s) or
part thereof by a new or remanufactured equivalent at no charge, within the above
specified period. This repair or replacement remedy shall be the sole and exclusive
remedy provided under the “Limited Product Warranty” and shall not extend beyond
the ten years period set forth herein.
This “Limited Product Warranty” does not warrant a specific power output, which shall
be exclusively covered under clause 2 hereinafter (“Limited Peak Power Warranty”).
1
Limited Product Warranty –Repair or Replacement
Ten (10) years
Limited Warranty for PV-Modules
7
DISCLAIMER OF LIABILITY
Since it is impossible for PHONO SOLAR to control installation, operation, application
and maintenance of the photovoltaic system according to this instruction, PHONO
SOLAR does not accept responsibility and expressly disclaims liability for any loss,
damage, or expense arising out of or in any way connected with such installation,
operation, use or maintenance.
PHONO SOLAR will not take any responsibilities for any possible violation of patent
rights and third party rights that are related to application of the solar energy system.
No permission of patents is given through implication.
The information of this instruction is from knowledge and experience of PHONO
SOLAR, and so it is reliable. However, the instructions and suggestions of this
instruction do not make an external or internal of guarantee. PHONO SOLAR reserves
the right to revise this instruction, products and all the information about products
without prior notification to customers.
6
MAINTENANCE
In order to ensure optimum module performance, PHONO SOLAR recommends the
following:
6.1
If necessary, the glass front of the module can be cleaned with water and a
soft sponge or cloth. A mild, non-abrasive detergent can be used to remove more
stubborn stains.
6.2
Check the electrical and mechanical connections periodically and make sure they
are clean, safe, complete and secure.
6.3
In the event of a problem, consult with a licensed/qualified person.
