DO NOT use mirrors or
magni
fi
ers to concentrate
sunlight onto the module.
DO NOT lift or move the
module by holding the
junction box or cable
.
DO NOT expose the back of
the module to direct sunlight.
DO NOT drill holes in the frame.
DO NOT install or handle
module in wet or strong windy
conditions.
DO NOT use module near
equipment or in places where
flammable gases may be
generated or collected.
Insulated gloves must be worn
while handling the module and
during the installation.
DO NOT wear metal ornaments
while handling the module or
during the installation.
DO NOT place anything on
the module or press on the
module surface.
DO NOT drop the module or
allow objects to fall on the
module.
DO NOT paint the module
or attach anything on to
the back of the module.
DO NOT attempt to disassemble
the modules, and do not remove
any attached nameplates or
components from the module.
Rated Power
Tolerance
Rated Power Voltage
Open C
ircuit
Tolerance
Rated Power Voltage
Rated Power
National
Power
Module (IEC)
Rated Power
Tolerance
Rated Power Voltage
Open C
ircuit
Tolerance
Rated Power Voltage
Rated Power
National
Power
Module (IEC)
ted Power
Rat
Tolerance
To
d P
R t
Module (IEC)
Rated Power
Tolerance
Rated Power Voltage
Open C
ircuit
Tolerance
Rated Power Voltage
Rated Power
National
Power
Module (IEC)
01
Rated Power
Tolerance
Rated Power Voltage
Open C
ircuit
Tolerance
Rated Power Voltage
Rated Power
National
Power
Module (IEC)
Stability / Reliability / Creativity
1
IMPORTANT SAFETY GUIDE
This manual contains information regarding product identification and the safe installation
and maintenance of photovoltaic modules (hereafter referred to as “module”) supplied by
PHONO SOLAR TECHNOLOGY CO., LTD. (hereafter referred to as “PHONO SOLAR”). The
term “module” can be interpreted as a single module or multiple modules depending on
the context.
Installers must already be familiar with the mechanical and electrical requirements for a
photovoltaic system. Installers must also read this manual carefully prior to installation. We
recommend that you keep this manual in a safe place for future reference and in case of
future sale or disposal of the module.
1.1 General Safety
The installation of a photovoltaic system requires specialized skills and knowledge and
must only be carried out by licensed/qualified persons.
Installers should assume all risks of injury and do everything to avoid potential damages
and risks that might occur during installation, including but not limited to, the risks of
electric shock.
PHONO SOLAR modules do not need special cables for connection. All of the modules
have permanent junction boxes, cables and connectors.
Do not use mirrors or magnifiers to concentrate sunlight onto the modules.
The modules generate DC electrical energy from sunlight. They are designed for outdoor
use and can be mounted onto frames on rooftops or in the ground etc.
Do not paint the module or attach anything on to the back of the module.
Do not attempt to disassemble the modules, and do not remove any attached
nameplates or components from the modules.
1.2 Handling safety
When handling the module insulated gloves must be worn.
Inappropriate transportation and installation may break the module.
Do not lift or move the module by holding the junction box or cable.
Do not place anything on the module or press on the module surface.
Do not drop the module or allow objects to fall on the module.
Do not expose the back of the module to direct sunlight.
