Phonic WM-SYS3, User Manual

Page: 4 / 26

4
WM-SYS3 / WM-SYS3D / WM-SYS4 / WM-SYS4D
INTRODUCTION
Congratulations on your purchase of the
WM series of wireless kit for use with ac-
tive speakers. With either the stereo or
mono WM kits, you are now fast on your
way to becoming completely wireless in
your audio set up. The WM modules are
not only fantastic in style and convenience,
however; they are incredibly easy to use,
as this manual will no doubt prove.
Please have a thorough read of this
user’s manual before operating the WM
modules. Inside this guide you will find
information on the ease of your wireless
set up, as well as some great trouble-
shooting tips and a complete run-down
on your modules’ features. After reading,
place the manual in an easy to remember
place so that you can come back to it in
future if ever necessary.
SYSTEM COMPONENTS
WM-SYS3(D) includes :
x WM60 single channel transmitter
x WM400(D)-L receiver
x power supplies for WM60 and WM400(D)-L
M6, M8, M0 screws
Velcro strip
WM-SYS4(D) includes :
x WM70 dual channel transmitter
x WM400(D)-L left channel receiver
x WM400(D)-R right channel receiver
3x power supplies for WM70, WM400(D)-L
and WM400(D)-R
M6, M8, M0 screws
Velcro strip
FEATURES
● Wireless system for saving the audio
cables between your mixer and active
speakers
● Stand-alone UHF wireless receiver,
working with any active speakers
● VDC external power supply (coun-
try dependent)
● 6 user-selectable frequencies
● RF carrier frequency range :
64.75~804.800 MHz (FCC)
64.75-864.800 MHz (CE)
● Operating range: 0 ft. (70m, envi-
ronment dependent)
● Indicators for power on, AF and RF
● Antenna: external, threaded connector
● Audio output connectors: XLR out
● Internal squelch and mute circuit
mode can resist extraneous noise
● M6, M8, M0 screws and Velcro strip
included for attaching receiver unit to
any active speakers
“D” Systems plus:
● 300 ms digital delay processor for
compensation of different distance
speakers
● 0. millisecond to 300.0 millisecond
delay range, delay adjustment may be
made with 0. millisecond precision
● 30 preset EQ curves and variable
high cut and low cut filters
● 4-digit display to indicate frequency
channel and delay, plus AF, RF and
delay bypass indicators