Phonic WM-SYS3, User Manual

Page: 5 / 26

5
WM-SYS3 / WM-SYS3D / WM-SYS4 / WM-SYS4D
QUICK SETUP
Single Channel Setup
With any one active speaker, users are
able to wirelessly send a monaural sig-
nal through the WM60 transmitter and
WM400(D) receiver.
1. Plug the mixer’s main output (with a
line-level signal) to either the XLR or
/4” input of the WM60 transmitter.
2. Connect the provided DC power sup-
ply to the WM60’s and WM400(D)’s
power input and an appropriate AC
power source.
3. Adjust the channel on both the
WM60 and WM400(D) so they are
identical. If you wish to send and re-
ceive a signal successfully, this is of
utmost importance!
4. Adjust the WM60’s and WM400(D)’s
antennas into a vertical position.
5. Connect the WM400(D)’s XLR output
to the input of your active speaker.
6. Turn the WM60 on first, then the
WM400(D).
7. Provided you have a signal going out
of your mixer, and your Speaker is
turned on, the wireless transmission
should be working.
OFF ON
SIG/CLIP
WIRELESS TRANSMITTER
WM60
WM60
WM400