Phonic UM 30, User Manual

Page: 7 / 36

UM 30/31/40/41/50/51 7
2. Receiver Module (UM-R10 and UM-R11� UM-R10 and UM-R11��
This receives the RF signal sent from the
handheld transmitter. The UM-R10 has four
LED indicators: two RF, one AF and a Power
indicator. The UM-R11 simply has 1 for Power.
I. Power indicator Power indicator
This LED will illuminate when the receiver
module receives power.
II. RF LED Indicators
When one of these LEDs is illuminates, it
indicates that the bodypack’s signal is being
received successfully. The RF LED that lights
up is determined by whichever antenna is
receiving a clearer signal from the transmitter.
If for some reason this LED does not turn on,
check your batteries in the transmitter and
configuration and try again.
III. AF LED Indicator
When this LED is illuminated, it indicates
that there is an audio signal present. If this
LED is not activated, check the head of the
microphone is correctly attached, and double
check your set up.
IV. Channel Selector Channel Selector
This indicates the channel number that is
actually in use by the receiver. This number
should be identical to the channel selected on
the transmitter.
V. Volume Volume
This dial determines the audio level of the
signal received by the UM-R10 receiver.
UM-R11
UM-R10