4
POWERPOD 2000R
English
17.
Vocal Enhance Button
This button, found on channels 1 through 5, enables a
vocal enhancement circuit on the corresponding channel.
18.
PAD -20 Button
The PAD -20 button, located above the 1/4” phone jack
on mono channels, is used to attenuate the input signal
by 20 dB. This should only be pushed in when using line-
level input devices.
FX Station (Digital Effect Processor)
19.
Effects On Button
Pushing this button will turn the built-in effect processor
on and off.
20.
Program Control
This control will allow users to select one of the 16 built-in
digital effects of the Powerpod powered mixer. The effect
names that correspond with the numbers can be found
above this control, or details can be found in the digital
effect table.
21.
Parameter Control
Turning this control will adjust the one main parameter of
the selected effect. Each effect’s parameter can be found
on the digital effect table at the end of this manual.
USB Recorder
22. Display
This small LCD display will show the track number
currently being played or details on your current recording.
It also offers play, pause and record indicators to the left
of the display. When in playback mode, the screen will
indicate the type of file type the unit is currently playing:
wav, mp3 or wma.
23.
USB Port
Connect your USB flash drive to this input. Once a drive
is connected, the files will initiate and you will be able to
play or record files.
24.
Play/Pause Button
Push this button to start and stop playback and recording
of the currently displayed track. Starting a track after it
is paused will resume the track from the point at which it
was paused (in both record and playback mode).
25.
Return/Skip Buttons
Pushing these buttons will allow users to skip ahead and
back between tracks in sequence.
26.
Stop/Menu Button
Push this button to stop the currently playing or recording
track. When pushed and hold, this button will allow
access to the recording module’s menu. The menu allows
users to select playback and recording modes, a number
of different repeat modes, the ability to delete files from
USB flash discs, and a level control for playback signals.
27.
USB To Main Control
This control adjust the final signal level from the USB
player to the main mix.
17
18
20
19
21
27
23
22
24
25
26
