Phonic MX 300, User Manual

Page: 4 / 22

4 MX 300 / 306
INTRODUCTION
Congratulations on your purchase of the Phonic MX
DJ Mixer series – MX 300 or MX 306. In order to get
the best performance of the MX DJ Mixer series,
please read all safety and owner’s manual carefully
before operating the mixer, and keep it in a safe place
for further reference.
FEATURES

Channel 1-3 on the front panel switchable
between phono, mic or line.

Mic 1 microphone-input via unbalanced XLR-
socket on the front panel

Mic 2, and 3 microphone-input via 1/4” mono-jack
on the back panel

Input sensitivity control (gain) for each channel

3-fold, separate tone-control (bass, middle,
treble) for each channel with extremely wide
range

Limited Killfuntion (attenuated to –30dB) and
limited F/X-function (enforced to +15dB) possible.
You can cut the signal almost completely off by
turning the control to the left.

High-quality smooth channel faders

Super long durable crossfader replaceable from
above

Crossfader for mixing channels 1, 2,and 3
(crossfader assign button)

2 beat-indicator at the crossfader for perfect
mixing

3 LED-level-displays (master-out L/R and Cue
Level)

Headphones-connection on the front panel

Headphone-output adjustable via Cue Level-
control

Additional Cue Split/Cue Mix-button

Cue Split function: the Cue-signal is on the one
side of the headphones and the output-signal on
the other side

Cue Mix function: the adjustable mix of cue-
signal and output signal is on both sides of the
headphones

Mixing of the headphones-signal possible via cue
mixing-fader

Output signal adjustable via master-control and
balance-control

Master-Out, Booth-out, and Rec-Out via 2 RCA-
sockets each

Rec-Out independent from master-level for
records with static level

Separately controllable monitor-output (DJ-booth)
for connecting active speaker or an additional
amplifier

High-grade discotheque-mixer with a convincing
sound

Beat meter (MX306 only)
GETTING STARTED
1. Before turn on the power, set the Master output
control on each channel all the way off
2. Always turn the power off before connecting or
disconnecting cables
3. Check the AC Voltage before connecting the AC
plug