Phonic MM 1805, User Manual

Page: 18 / 40

17
2.1.5 GRAPHIC EQUALIZER
64
. EQUALIZER
Stereo 7-band graphic equalizer with center frequency at 60, 120, 360, 1K,
2.5K, 7K, and 16K. With cut or boost of 12dB, allow precise global control
over subtle tonal changes to the PA rig in a particular room. The built-in
graphic equalizer is intended to trim the overall sound to suit the room, and
is not designed to null out frequencies to prevent feedback .A full 31-band
EQ is recommended for that purpose, please refer PHONIC 29-band or 31-
band EQ(PHONIC MQ3229/4130/4230 or MQ 3300/3600).
65
. EQ ON
The stereo EQ channel may be switched on or off by the EQ ON button,
this allows a direct comparison to the treated signal (with EQ) and un-
treated signal, to judge the effect of the graphic setting. While adjusting
these frequency faders, the stereo output will be affected simultaneously.
2.1.6 OUTPUT FADERS
66
. ST FADER
This 60mm long fader controls the output level of MAIN OUT (31) or EQ
OUT(38) to be fed into the built-in EQ or external equipment.
67
. MONO FADER
This 60mm long fader controls the output level of MONO output (35).
68
. Group 2
This 60mm long fader controls the output level of the group 2 mix.
69
. Group 1
This 60mm long fader controls the output level of the group 1 mix.
70
. AFL
AFL is a similar function to PFL, but it is after-fader instead of pre-fader.
71
. GROUP L/R SWITCH
Group L/R switch routes the Group 1 or Group 2 to the left or