Phonic KT-210A, User Manual, Page: 17 / 30

13
KT-8A / KT-210A
KT-8A / KT-210A
English
SETTING
The setting menu includes a number of properties
that can be adjusted, including connection and power
settings.
CONNECT: The connect window within the setting
menu simple provides the status of the currently
selected KT speaker. When “Online”, it means a
connection was successfully established between
the speaker and the software. The “Connect” button
should be pushed to establish a connection.
POWER SETTINGS: The power settings provide
indicators for the current status of the selected KT
speaker. “ON” indicates that the speaker is activated
while “Standby” means there is currently no sound
from the speaker but it is in standby. The status of
the KT speaker can be adjusted by the “S/W Power”
buttons. “Online” will activate the speaker while “Of-
fline” will put the speaker in standby mode. The power
switch can be de-activated by the “Power Switch”
option. Essentially the disable button will allow you to
bypass the hardwired power switch on the currently
selected KT speaker.
SCENE SETTINGS:
The scene feature essentially
allows you to save all of your settings, including your
MAIN, HPF, EQ, CROSSOVER, LIMITER and DELAY
settings. The currently selected SCENE name will
be displayed in the scene window. The SAVE button
will allow you to save your scenes while the LOAD
button will let you load up a previous saved scene.
The “INT” button will initialize the system, basically
resetting all functions back to their factory presets.
When requiring identical settings on multiple speak-
ers within the array, Phonic suggests saving the
scene after everything is set, then reloading these
scenes on all subsequent speakers. This will save
valuable setup time.
DEVICE: The device ID will be displayed within this
window, as set by the KT series’ DIP switches located
on the bottom of the unit. Please note that every de-
vice connected to your KT Network System software
should have its own unique Device ID. This allows
the software to correctly identify each independent
speaker.
Directly below this setting, the current firmware ver -
sion of the system can be found. Please remember,
the latest firmware for your KT speakers can be found
on www.phonic.com.