Phonic KT-210A, User Manual, Page: 12 / 30

8
KT-8A / KT-210A
KT-8A / KT-210A
English
PARAMETRIC EQUALIZER
The KT software also includes a 10-band parametric
equalizer that can be utilized instead of the 31-band
graphic equalizer. Simply select the appropriate func-
tion button to activate the 10-band PEQ.
ON BUTTON: This simply turns the PEQ on and off.
FUNCTION: The function button will allow you to
select whether to use the PEQ or GEQ.
DISPLAY GRAPH: This plotted graph allows you to
view the curve created by the graphic equalizer. Each
of the EQ bands can simply be dragged (using the
mouse) to adjust the frequency and level.
METER: Located beside the display graph, these
level meters provides up-to-the-second information
on your PEQ’s signal input and output levels.
PEQ ON/OFF BUTTONS: Each of the 10 bands has
its own independent on/off buttons. When turned off,
the corresponding band will no longer appear in the
display graph.
TYPE:
This determines the type of of band used. A
“PEAK” band will simply peak at the selected frequen-
cy/level, while a “SHELF” will level off at the selected
frequency. A “HIGH CUT” or “LOW CUT” will remove
all frequencies above/below the selected frequency.
GAIN/FREQUENCY/Q: The gain, frequency and Q
can be adjusted within these windows. The gain and
frequency can easily be adjusted within the display
graph by moving individual points, however all three
can also be edited here. Push the left mouse button
to reduce the values and the right mouse button to
increase.
FILE: The file window will display the currently loaded
preset for the EQ. This can be selected by pushing
the LOAD button.
SAVE: Push the save button to save the current
settings of the EQ. These are saved locally on the
computer and can be recalled at a later time.
LOAD: Selecting load will allow you to recall any of
the previously saved EQ settings.
RESET: The reset button will return the EQ back to
its default settings.