Phonic KT-210A, User Manual, Page: 13 / 30

9
KT-8A / KT-210A
KT-8A / KT-210A
English
CROSSOVER
Both the KT-8A and KT-210A have an internal cross-
over. This essentially separates the high, mid and low
frequency audio from your main signal to be sent to
their respective speakers. LF is sent to woofers, MF
is sent to mid-ranges and the HF is sent to tweet-
ers. The KT-8A includes a three-way crossover (LF,
MF, HF) while the KT-210 has a two-way crossover
(LF, HF).
TYPE: This determines the type of crossover the KT
series will use. The default setting for this is a 24dB/
octave butterworth but a number of other types and
curves are available.
DISPLAY GRAPH:
This will show the properties of
your crossover, including frequencies, levels and the
selected curve.
HIGH PASS FILTER (HPF) FREQUENCY:
This field
determines the cut-off frequency of the corresponding
crossover’s HPF. Frequencies below this point will be
removed at a predetermined rate. The rate at which
the frequencies below this point are cut is dependent
on the selected “type”.
LOW PASS FILTER (LPF) FREQUENCY:
This field
determines the cut-off frequency of the corresponding
crossover’s LFP. Frequencies above this point will be
removed at a predetermined rate. The rate at which
the frequencies below this point are cut is dependent
on the selected “type”.
METER: These meters show the KT crossover’s input
and output levels. As this is a crossover, there are
independent level meters for each the low frequency,
mid frequency and high frequency outputs.
FILE: The file window will display the currently loaded
preset for the CROSSOVER. This can be selected
by pushing the LOAD button.
SAVE: Push the save button to save the current set-
tings of the CROSSOVER. These are saved locally
on the computer and can be recalled at a later time.
LOAD: Selecting load will allow you to recall any of
the previously saved CROSSOVER settings.
RESET:
The reset button will return the CROSS-
OVER back to its default settings.