Phonic IA231F, User Manual

Page: 4 / 16

iA231F / iA231FD User's Manual PHONIC CORPORATION
page 4 page 5
PHONIC CORPORATION iA231F / iA231FD User's Manual
INTRODUCTION
We at Phonic would like to congratulate you on making
the wise choice in investing in an all new iA231F or
iA231FD graphic equalizer, analog in appearance, but
purely digital on the inside.
The iA231F and 231FD are dual channel, 1/3 octave 31-
band graphic equalizers with 6 or 12 dB of boost or cut
to ISO standard frequencies between 25 Hz and 10 kHz,
giving you, the user, ultimate control over your audio
quality in most any situation.
Featuring feedback elimination, a handy take-it-or-
leave-it delay control, as well as a nifty high pass filter,
allowing for those troublesome and mind-numbingly
pointless low-frequency sounds to be removed without a
hassle, the iA series takes care of various needs that any
regularly equalizer would no doubt forget.
Provided your iA equalizer is used correctly, it should
provide you with many years of valuable use; which is
why we have included this handy user's manual. Read
on, dear friend, and you shall find tips and hints and
such, the likes of which no other equalizer user's manual
has ever offered. And if that doesn't sell you on reading
through this manual, perhaps you could do it anyway,
storing it afterwards in a place you can remember and
find later, if need be.
FEATURES
l
Professional DUAL 31-band, 1/3 octave stereo
Graphic Equalizer
l
30mm VR for precise adjustment
l
Feedback Detection System instantly reveals critical
frequencies and can also be used as Audio Analyzer
l
Built-in limiter control form -20 dB to +20 dB (OFF)
l
Variable low-cut filter, 15 to 400 Hz (off), and high-cut
filter, 2.5 to 30 kHz (off)
l
Switchable boost/cut range between 6 dB and 12 dB
l
EQ IN/OUT switch
l
I/O level meter switch
l
Dedicated mono subwoofer output with adjustable
crossover frequency
l
+15dB to -∞ input gain range for easy level matching
l
Stereo link function
l
8-segment LED meter with clip warning for input
l
Illuminated fader
l
Servo-balanced outputs with 1/4” TRS and XLR
connectors
l
Digital AES/EBU XLR and S/PDIF RCA connectors
(iA231FD only)