10
21
SQ1B:
The red diode shows, when receiver 1 uses antenna B.
3.2 OPTIONS
WARNING!
Before starting any of the following instructions the power cord
must be removed from the main power supply socket and the
installations should only be undertaken by qualifi ed personnel.
Removing the
Remove the 3 screws on the top of the amplifi er. Place the tip of
blank panel:
a screwdriver in the hole in the panel and pull downwards
carefully. The panel can then be pulled out (see fi gure below).
Installation of
Remove the blank panel as shown above. Install the WTU tuner
WTU module:
module as shown below.
LogiBit 1200 manual
Features on the Back Panel