background image

Wall Mounting

The PMP-3850 telephone may be installed onto tw o screws (not included) fas-
tened into the wall. When installing screws into plasterboard walls, use wall
anchors (not included) to ensure that the scre ws remain secure. Insert the
screws into the wall leaving 3/16" of each screw extending out from the wall.
See the wall mount template on page 45 to proper ly space the screws in the
wall for mounting. The PMP-3850 is not compatible with mounting on a
standard telephone wall plate.

Wall Mounting Instructions:

1. Remove the handset from the

base.

2. Turn the base over so the under-

side of the base faces you.

3. Adjust the base to the w all mount

position.

4. Plug the supplied 7-foot telephone

cord into the 

LINE

jack on the

telephone.

5. Connect the telephone line cord

to the wall jack.

6. Insert the AC adapter into the 

9V

DC

jack on the top of the base .

7. Run the cables down through the cable channel to allow for flush wall

mounting.

8. Slip the telephone base onto the w all, lining up the w all mounting holes over

the screws. Slide the telephone base down so it is firmly in place.

9. Return the handset to the telephone base .

10. Plug the other end of the A C adapter into the AC outlet.

14

TELEPHONE SETUP

Caller ID allows the caller's name and phone number to be shown on the display
before you answer the call. In order to use this feature you must first subscribe
to Caller ID service with your telephone company.

When You Receive a Call

1. When the telephone rings, the caller's name and
phone number appears on the display.
2. The new Caller ID record includes the name and number of the caller and
the time and date the record is received. The New Call light will flash to
indicate that you have a new Caller ID call stored in memory.

Note:

When the Caller ID information is received, it is stored in memory so that

this information can be recalled for later use. Up to 80 Caller ID calls
can be stored.

Viewing the Caller ID List

This phone automatically stores the last 80 calls received. If a call is received
from the same number more than once since the records were last viewed, no
new entry is made, but the repeat call icon ( "

RPT"

 ) is displayed.

CALLER ID

1.  With the handset idle press

 or      .

2.  Any unviewed (new) calls will be displayed first. The
     most recent call will be displayed. The information on
     the call will be displayed with the name, number, date,
     and time that the call was received.

3.  To scroll to the next call, press    or     .  The     will go
      through the calls from the last call received to the first.
      The

will allow you to view the calls from the first call

      received to the last.

4.   If the name or number is more than 11 characters,
      press the      or     button to view the rest of the display
      (as indicated by the arrows in the top line of the
      display).

5. Press              to return to the idle display.

Talk

1

2

3

ABC

DEF

4

5

6

GHI

JKL

MNO

7

8

9

PQRS

TUV

Menu

Redial

Flash

WXYZ

*

0

#

DIR

Delete

CHAN

Edit

Voice Mail

Save

PM

PM

DIR

 33

Summary of Contents for PMP-3850

























Reviews: