manualshive.com logo in svg

PhoneMate PMP-3850, Installation And Operating Manual, Page: 8 / 24

Share
Download
PhoneMate PMP-3850 Installation And Operating Manual Download Page 8

Headset Jack

LCD Display

Microphone

Dial Pad

New Call Light

Volume Switch

LOCATION OF CONTROLS AND FEATURES

View Lewf Button

Up/Down  Button

Talk Button

Temporary Tine 
Button

Menu Button

View Right Button

Delete Button

Directory Button

Redial Button

Flash Button

PM

 7

Your PMP-3850 telephone has been designed to give years of trouble-free
service. It is a sensitive electronic instrument. To assure its longevity, please
read the following maintenance instructions.

1.  Keep the PMP-3850 away from heat as high temperatures can shorten the
      life of the electrical components and distort or melt its plastic parts.

2.  The PMP-3850 should be kept free of dust and moisture. If it gets wet, wipe it
     dry immediately. Liquids can contain minerals that can corrode electronic
     circuits.

3.  Handle your PMP-3850 gently and carefully. Dropping it can cause serious
     damage to circuitry, or the plastic case, which may result in malfunction.

4.  Do not use any type of chemical or any abrasive powder to clean the cabinet.
     Use only mild detergents on a soft, damp cloth to clean the PMP-3850
     telephone.

5.  The PMP-3850 has built-in surge protection circuits that meet or exceed FCC
     requirements. However, an incident such as a lightning strike at or near the
     telephone lines, could cause serious damage.

6.  If the PMP-3850 is installed in an area with frequent or severe electrical
     storms, it is suggested that the telephone be disconnected during these
     storms or that additional surge suppression equipment be added to the
     installation.

7. In the case of trouble with the telephone, do not attempt to repair the
     telephone yourself. It is the responsibility of users requiring service to report
     the need for service to our Service Department. They will make the
     necessary arrangements for repair or replacement.

8.  If you should have any questions about the operation of your PMP-3850
     telephone, please call our Service Department at 

1-800-592-1336

. Or you

     may contact TT Systems LLC for technical assistance via our Internet Web
     site: 

www.ttsystems.com

or e-mail:

[email protected]

.

9.  Please register your product online at

www.ttsystems.com/CustomerSupport/RegOnline.asp

CARE AND MAINTENANCE

 40

Summary of Contents for PMP-3850

























Reviews:

No comments