8
We recommend you are fully charging the DynaMic. The battery cannot be over-
charged.
Battery status indication
DynaMic provides as inspiro an automatic vibra alarm if the battery is low.
Ca. 1 hour before the battery is empty: It needs to be charged within one hour.
The LED indicates 3 orange flashes repeated every 60 seconds and the vibra alarm starts
vibrating.
Ca. 15 min before battery is empty: It needs to charge DynaMic immediately.
The LED indicates 10 orange flashes and the vibra alarm starts vibrating.
If the battery is not being charged at that time, DynaMic switches off automatically after
flashing 10 flashes.
Vibration alarm indication
The transmitter provides a vibration alarm, if
•
The battery is low,
•
The device is out the range of the initiator of the MultiTalker Network,
•
DynaMic is muted for more than 15 minutes,
•
There is no FM transmission , DynaMic is not paired,
•
The distance in the MultiTalker Network is higher than 8m,
•
System problem, which are transformed in fast blinking orange LED signals and a
vibration alarm.
In case of system problem one need to press the Reset button
Switch on DynaMic
DynaMic
is a pass- around microphone to transmit with inspire in the MultiTalker Network .
It is not a standalone FM transmitter.
To switch DynaMic follow the steps below.
•
inspiro and DynaMic are both off
Summary of Contents for DynaMic
Page 1: ...1 User Guide DynaMic ...
