14
Initiating a MultiTalker Network
Initiating or setting up a MultiTalker Network should be performed before the lesson begins
in the classroom. The procedure to follow is straightforward and the inspiro menu guides
you through the necessary steps. See the chapter “Switch on DynaMic”.
•
Make sure that you have on the desk all the inspiro and DynaMic transmitters you plan
to include in the network. Ensure that all inspiro/ DynaMic transmitters are switched off.
•
Take the main teacher’s or main speaker’s inspiro and switch it on. In this inspiro,
select MultiTalker Network and then Set up network. This inspiro is known as the
initiator.
•
Read the information on the LCD display and then press the Start soft key.
•
Then switch on all of the other inspiro and DynaMic transmitters.
•
A list of the inspiro and DynaMic transmitters that have joined the network should now
be displayed on the initiating inspiro. If all of the transmitters are listed, press the
Continue soft key.
You have successfully created the network!
All inspiro and DynaMic transmitters are synchronized by the initiator inspiro.
Begin talking as usual.
How to use a MultiTalker Network
•
The inspiro that has set-up (initiated) the network has first priority; all other
transmitters inspiro
/
DynaMic that joined the network have second priority. The
teacher with first priority can interrupt any teacher or student that has second
priority; a second priority teacher or student can only take over during the speech
pauses of the first priority teacher.
•
All devices transmit on the same FM channel,
but they do not transmit at the same
time
•
No user action is required; if the first priority inspiro does not detect speech, any
second priority teacher or student can ‘get the microphone’ just by starting to talk
•
The listening FM receivers only receive one voice at a time
Summary of Contents for DynaMic
Page 1: ...1 User Guide DynaMic ...
