Procession system ZP-40 SLIM
M a d e i n E u r o p e
19.- LOW BATT. OPERATION DISPLAY
Th
e red LED display does not light
,
when the procession system is switched on (POWER ON), and the
accumulator is sufficiently charged resp. shows enough energy for the operation.
The LED display only lights „RED“, when the accumulator us unloaded and when there is only residual
energy available to operate the system. Then the system has to be charged!
IMPORTANT:
Should the red LED display activate itself, you have approx. 30 seconds time to connect the procession
system to the charging device. The system is switched off by the control system and the deep discharge
protection is active.
The procession system ZP-40 SLIM resp. ZP-40 SLIM/2 can be connected to the charging device and
loaded also during the operation (charging process active).
Please carry out the charging process as long until the yellow LED display No. 20 [LOAD] extinguishes.
20.- LOAD OPERATION DISPLAY
The orange LED display lights, when the automatic charging system is activated and only as long until the
accumulator is fully charged.
Please carry the charging process out like follows:
1- plug the coupling socket of the charging device into the input No. 21.
2- supply the deliverd charging device with mains voltage 230VAC/50Hz.
The charging process is activated automatically and the orange LED display lights. This process can last
up to 10 hours.
The charging process is interrupted automatically when the accumulator is fully loaded.
A personal supervision of the charging process by the user is not necessary.
3- Should the [LOAD] display be expired, please at first separate the charging device from the mains voltage
and then separate the charging device from the procession system resp. the plug from the jack No. 21
[24VDC].
21 .- 24VDC INPUT (mains operation and loading input)
The built-in 24VDC jack is used as power supply 24VDC for so-called mains operation with accumulator
control and at the same time as input for the charging process.
Please consider the chapter 20/
20.- LOAD. OPERATOIN DISPLAY
.
22.- TRIPOD FLANGE/SHOULDER STRAP BRACKET
At the lower part of the procession system there is a flange located with 35 mm diameter for tripod recording.
Thereby the sound system ZP-40 SLIM can also be used as stationary system in your church or for church
services in the outdoor area.
IMPORTANT:
The lower flange is at the same time used as recording for the supplied shoulder strap
.
CONTROL ELEMENTS OF THE FRONT SIDE
5.
„
Copyright 2013, Phoenix Professional Audio GmbH
www.phoenix-pa.com / shop.phoenix-pa.com
“
Phoenix Logo is registered at the German Patent and Trademark Office (TM)
All brands are property of their respective owners.
Summary of Contents for ZP-40 SLIM
Page 12: ......