background image

 

 

BlueSpin

 (Hotplate) Magnetic Stirrer

 

Preface 

Welcome  to  the  RSM-10  (Hotplate)  Magnetic  Stirrer”. 

Users  should  read  this  Manual  carefully,  follow  the 

instructions  and  procedures,  and  be  aware  of  all  the 

cautions when using this instrument.   

Service 

When  help  needed,  you  can  always  contact  the  Service 

Department  of  manufacturer  for  technical  support  in  the 

following ways: 

 

Phoenix Instruments GmbH 

Heinkelstr. 10 

308927 Garbsen/Germany 

Tel: +49-5131-9081890 

Fax: +49-5131-9081839 

E-mail: [email protected] 

Http://www.phoenix-instrument.de

 

 

 

 

Please provide the customer care representative with the 

following information

 

• Serial number

on the rear panel

 

• 

Certification

 

• Description of problem (i.e., hardware or software) 
• Methods and procedures adopted to resolve the problems 
• Your contact information 

Warranty 

This  instrument  is  warranted  to  be  free  from  defects  in 

materials  and  workmanship  under  normal  use  and  service, 

for  a  period  of  24  months  from  the  date  of  invoice.  The 

warranty is extended only to the original purchaser. It shall 

not apply to any product or parts which have been damaged 

on  account  of  improper  installation,  improper  connections, 

misuse, accident or abnormal conditions of operation. 

For  claims  under  the  warranty  please  contact  your  local 

supplier.  You  may  also  send  the  instrument  directly  to 

manufacturer,  enclosing  the  invoice  copy  and  by  giving 

reasons for the claim.

Summary of Contents for RSM-10HS/HP
















Reviews: