Phoenix RPC12 Series, Cli Reference Manual

Page: 23 / 245

24 Phoenix RPC12 Series CLI Reference Manual • September 2008
Command Syntax
This section describes syntax rules for CLI commands.
Q
“Keywords and Parameters” on page 24
Q
“Disk Drive Syntax” on page 24
Q
“Virtual Disk Syntax” on page 25
Q
“Volume Syntax” on page 25
Q
“Volume Mapping Syntax” on page 26
Q
“Host Nickname Syntax” on page 26
Keywords and Parameters
Command keywords must be entered in lowercase. Parameter values can be entered
in uppercase and lowercase.
Parameter values that contain non-alphanumeric characters, such as spaces, must be
enclosed in quotation marks (
"
), which the CLI parses and removes.
Disk Drive Syntax
You can specify disk drives by using either:
Q
A disk drive ID. For example,
4
.
Q
A hyphenated range of disk drive IDs from
a
to
z
. For example,
5-7
.
Q
A list of disk drive IDs, ranges, or both, separated by commas; do not include
spaces before or after commas. For example,
4,6-9
.