Chapter 3 Command Descriptions
135
set user
Description
Changes a user’s level, type, and interface access. To change a user’s password, use
set password
.
Input
set user
name
[level monitor|manage] [type standard|advanced
|diagnostic] [interfaces
interfaces
]
Parameter
Description
name
Specifies the user profile to change. Names are case
sensitive.
level
monitor|manage
Optional. Specifies whether the user has
monitor
(view-only) or
manage
(modify) access for user
interfaces. The default is
monitor
.
type
standard|advanced
|diagnostic
Optional. Specifies the user's level of technical
expertise, to control access to functionality in the WBI.
•
standard
: Enables access to standard
administrative functions. This is the default for
monitor users.
•
advanced
: Enables access to standard and
advanced functions. This is the default for manage
users.
•
diagnostic
: Enables access to standard,
advanced, and troubleshooting functions. This is the
default for users of the CLI.
interfaces
interfaces
Optional. Specifies the interfaces that the user can
access. Multiple values must be separated by a comma
with no spaces. If this parameter is omitted, the
defaults are
cli
and
wbi
.
•
cli
: Command-line interface.
•
wbi
: Web-browser interface.
•
ftp
: File transfer protocol interface.
•
none
: No interfaces.
Summary of Contents for RPC12 Series
