![background image](http://html1.mh-extra.com/html/phoenix/props-kylo-v2/props-kylo-v2_assembly-instructions-manual_1551322003.webp)
Here you see the 2 different clip spacers, the clip, screws and wires.
The black 8mmtall bar should be used when you plan on using the saber to hang on your belt for
cosplay. If you only will display your saber and cliping it on a belt is not important then use the silver
4mm bar. The hero prop, prop shop hilt and several actual props have this 4mm high bar and it
’
s not
functional so I
’
m giving you the choice based on what you want to do with your saber.
If you use the 8mm spcaer for functionality, you
’
ll need to use the 2 x 12mm screws. If you use the
4mm spacer, this is what the 2 x 8mm screws are for. All of these screws are M2.5. You can also use
the 12mm screws for both bars if you like, but the 12mm screws might cause issues with a chassis if
you
’
re using them with the 4mm bar.
The 2 blue wires for the core and the red wire for the length of the saber.
4 cable holders for gluing to the body of the hilt.
3 round headed M3 main body screws.