Here is an exposed view of the upper section. The 3 blade plugs are fixed with a setscrew. The
Quillion setscrew is M2.5 and the main blade in M3.
The 2 quillion emitters screw on. Please pay attention to which side they are on. Each one is only
guaranteed to align right on the side it
’
s attached to when you got it. So if you swap them and things
don
’
t align, just swap them back.
Inside the core at the quillion there are 2 heatsinks with 2 holes to pass through wires for those who
wish to install the electronics. These heatsinks do not remove. They are fixed in. If you really, really
want to remove them it
’
s possible by heating the area and turning them out. It may take a lot of
force. Best to leave them.
This piece does not disassemble more. The upper and lower section of the core are in a fixed
position. This ensures the correct alignment.
