To select the other speed output voltage, press and release the
Stby
button. The display will show
the newly selected speed, then revert to the output voltage for that speed selection. Increase or
decrease the output voltage for the selected speed as above.
When output voltage selections are complete, press and hold the
Stby
button; the display will show
“SAV” and the voltage outputs will be saved in non-volatile memory. The PSU will then return to
Standby Mode
.
Pulley Select Mode:
Pulley Select Mode
is used to specify which pulley your motor is fitted with
(either 50Hz or 60 Hz operation). As shipped from the factory, the Eagle is set for the
small
spindle;
extensive testing has shown this to be the most stable option with the least vibration.
Enter
Pulley Select Mode
by removing the cable between the Eagle controller and the amplfier.
Press and hold the
Plus
button while re-inserting the cable. The display will show
:
Release the
Plus
button and the display will show the currently selected pulley/spindle combination.
Use the
Plus
and
Minus
buttons to toggle between 50Hz Small and 60Hz Small until the desired
combination is displayed. Press and hold the
Stby
button to save the selection and return to normal
operation.
The 2 selections are displayed as 50Hz Small and 60Hz Small .
5
