![background image](http://html.mh-extra.com/html/phoenix/440-ml/440-ml_operating-manual_1551228023.webp)
Phoenix 440-ML
January 2020
22
23. Photo Safety Eye
1. When the machine switch is set to FWD, it is possible to normally adjust speed of the
machine. If the photo safety eye is blocked, the motor will stop and the machine will
not operate. To reset, place the motor switch is in the center position. When pressing
the foot switch, the machine will operate, and the speed can be adjusted.
2. When the motor switch is set to reverse rotation, the machine will only operate when
pressing the foot switch; the machine will operate at 3ft/min.
3. When the motor switch is in the center position, the photo safety eye will be reset. When
pressing the foot switch, the machine will operate and speed can be adjusted. The
rotation direction will be in the forward rotation.
4. Anything blocking the photo safety eye will cause the motor to stop, i.e. curled prints,
hands, thick substrates.
5. If the boards being run through the machine keep blocking the photo eye, use the foot
pedal as it will override the photo eye.