Phoenix 2700 DH
July 2018
13
according to quality of output achieved.
•
Excess heat may damage the printed image or cause waves. Insufficient
heat may result in delamination.
•
Thinner stocks can be run faster, and thicker stocks or heavy ink
coverage should be run slower.
•
Some stocks and ink-sets cannot be effectively laminated with thermal
films. Compatibility testing is recommended before laminating long runs.
Warning
Ensure the
safety shield is in place before operating the Laminator.
Operating without the safety shield can cause serious injury.
14. Roller Cleaning Function
1.
First remove both the Safety Shield and Feed Table
2.
Turn main power ON/OFF switch to OFF position
3.
Press and hold the Reverse switch while turning the ON/OFF switch
back to ON
4.
Release the Reverse switch
a.
You will hear two audible beeps and the Power and Ready lights
will alternate on and off indicating the Cleaning mode
5.
Use the reverse switch to rotate the rollers for cleaning
6.
To return to normal operation, turn the main ON/OFF switch to OFF
7.
Return Safety Shield and Feed Table to locked position
15. Stand By and Auto Sleep Functions
1.
If the motor has been idle for Three (3) hours without running, the
machine will go into STAND BY mode. The temperature drops to 176° F
and the ready light flashes.
a.
To resume operation, press the MOTOR switch to the FWD
position, then back to the middle OFF position.
b.
Allow machine to reheat to proper temperature and ready light to
illuminate solid.
2.
If the motor has been idle for 4 hours without running, the machine will
go into SLEEP mode, and the heaters are turned off.
a.
To resume operation, press the ON/OFF switch to OFF position,
then back to ON and allow the ready light to come on.