Owner’s Manual — Phoenix 1200
Desiccant Dehumidifier
Installation, Operation & Service Instructions
1
www.UsePhoenix.com • [email protected]
Toll-Free 1-800-533-7533
Read and Save These Instructions
The Phoenix 1200 Desiccant Dehumidifier
• 900 CFM process airflow
• 300 CFM reactivation airflow
• 12” Inlet
• 8” Reactivation Outlet
• Dual 8” Process Outlets
• 230 Volt single phase:
- User selectable 25 or 40 amp draw
- All the standard 120 volt outlets available for
Phoenix air movers
• Fits easily through doors, up truck ramps and in SUVs
• Quiet operation
- Constant run mode or humidistat controlled mode
• Hi-Lo handles for easy lifting
• External filters and fuses for simple maintenance
• Tough weather resistant design
• Operating Range -10ºF to 120ºF
Specifications subject to change without notice.
TS-449b
02/12
4201 Lien Rd.• Madison, WI 53704
PN 4028000
The Phoenix 1200 Portable Desiccant Dehumidifier offers the
finest in air-drying equipment; however, this machine can only
provide maximum service if properly installed, operated, and
maintained.
This manual is provided to acquaint you with the dehumidifier
so that installation, operation and maintenance can proceed
successfully. Ultimate satisfaction depends on the quality of
installation and a thorough understanding of this equipment.
The dehumidifier is built around tested engineering principles
and has passed a thorough inspection for quality of
workmanship and function.
