Troubleshooting
MC10 control unit
26
66648 7.0
8.
Troubleshooting
This chapter describes troubleshooting methods for fixing problems. If you experience an error that
is not listed in this table, please contact your supplier.
CAUTION
Only qualified specialists who have received electrician training should carry out trou-
bleshooting and repairs.
Problem
Possible cause
Solution
The drive or control
unit is not functioning.
There is no mains supply vol-
tage.
Connect the mains power.
The drive or control unit is de-
fective.
Please contact your supplier or sales
agent.
The drive is suddenly
not capable of move-
ment.
The overheating protection or
system protection has been
triggered.
Remove the overload (change or re-
move the load).
Allow the system to rest for 20 to 30
minutes with the mains power un-
plugged.
If this does not resolve the problem,
contact your supplier or distributor.
The unit's fuse may have been
triggered.
Please contact your supplier or sales
agent.
There is no mains supply vol-
tage.
Connect the mains power.
A lead-in connection has been
interrupted (mains power, au-
xiliary drive or handset).
Check the cables and reinsert them,
if required.
Summary of Contents for DewertOkin MC10
Page 2: ......
