MC10 control unit
Installation
66648 7.0
21
6.2.5
Optional: Mounting the control unit with the adapter
Mounting the adapter on the control unit
Figure 11
Mounting the adapter on the MC10 control unit
1
Mount the optional adapter to the control unit using four screws (according to DIN 7981: 3.9 mm
diam. and 13 mm length), as shown in Figure 11.
Mounting to the end product
The MC10 control unit is screwed onto the end product by using four screws for the four mounting
points (e.g. DIN 7981 screws with 4.8 mm diameter and suitable length of 6 mm plus screw-in
depth).
NOTICE
Observe the following while mounting to the end product:
•
The MC 10 control unit should be mounted so that it lies against its supporting ma-
terial.
•
No mechanical forces or torsion should be exerted on it by the end product. Such
forces could lead to damage (such as cracks).
Summary of Contents for DewertOkin MC10
Page 2: ......
