Technical specifications
DC20 Lifting Column
16
92299 1.0
5.
Technical specifications
Rated voltage
24 V DC – 29 V DC
Current consumption at rated load
Max. 6 A, depending on version
(refer to the ratings plate)
Permitted push force
Max. 2000 N depending on version
(refer to the ratings plate)
Mode of operation
1
at max. rated load
Intermittent duty: 2 min/18 min
(max 5 switching cycles per minute)
Protection class
2)
III
Noise level
≤ 50 dB(A)
Drive type
Single drive
Load type
Pressure
Stroke
Max. 750 mm
Adjustment speed
3
Max. 22 mm/s
Protection degree
IPX4, max. IPX6
Dimensions and weight
Length x width x height
Min. 320.5 mm x 169 mm x 135 mm
Weight
Approx. 10 kg, depending on version
Ambient conditions for operation, storage and transport
Transport / storage temperature
From -20 °C to +50 °C
From -4 °F to +122 °F
Operating temperature
From +10 °C to +40 °C
From +50 °F to +104 °F
Relative humidity
From 30% to 75%
Air pressure
From 800 hPa to 1060 hPa
Height
< 2000 m
1)
Mode of operation: intermittent duty 2 min./18 min. This means that after the unit is operated with its rated
load for up to two minutes it must then be paused for 18 minutes. The system can malfunction if this pause
is not observed!
2)
Safety extra-low voltage
3)
Adjustment speed: the speed at which the clevis can move under no load (the speed varies depending on
the load).
