Operating elements
106986_en_01
PHOENIX CONTACT
31
4.1.6
Creating cable marking
When marking cables or conductors, it may be useful to attach a marking that is
readable around the cable.
Figure 4-6
Cable marking
•
Press the turquoise
key.
•
Select “5. Cable Wrap” . Press the
key.
•
Select the required settings (see below).
•
Press the
key to select an entry. Go back with
or
key.
•
You can select measurements with the arrow keys. Some measurements can
also be entered directly by using the number keys.
The following settings can be made:
When using
horizontal text alignment
, the optimum width of the label can be de-
termined automatically or you can specify a fixed width.
When using
vertical text alignment
, enter the diameter or the cross section of the
cable. The printer then determines the optimum length.
If you select this template, the entered marking will be deleted. First create the
template and than enter the marking.
Tem-
plate
Del./Back
Clear
Menu
Selection
Possible entry
Example
Horizontal text align-
ment
Vertical text align-
ment
-W1.3
-W1.3
-W1.3
-W1.3
-W1.3
-W1.3
