Starting up the printer
106986_en_01
PHOENIX CONTACT
11
2.4
Inserting the material cartridge
Figure 2-3
Replacing the material cartridge
•
Keeping the material cartridge straight, insert it into the compartment from
above so that it engages with a click.
Make sure that the material end is in the output tray.
•
To remove the material cartridge, pull it upward while keeping it straight.
2.5
Switching on the device
•
Switch on the printer using the green
key.
•
Press the green
key until the display lights up.
NOTE: Damage to the printer and material cartridge
If the printer is not going to be used for a prolonged period of time, remove the
material cartridge from the printer.
ON/OFF
ON/OFF
