SD FLASH 512MB MODULAR MUX
8 / 56
PHOENIX CONTACT
105752_en_03
2 Description of the SD FLASH 512MB MODULAR MUX
multiplexer system
2.1
Hardware and software requirements
– Two ILC 131 ETH Inline controllers (Order No. 2700973)
– Two SD FLASH 512MB MODULAR MUX SD cards (Order No. 2701872) with multi
-
plexer software
– Ethernet cable for directly connecting the two Inline controllers to each other
– Optional: two adapters for wireless communication, e.g., FL EPA 2 (Order
No. 1005955)
– Required Inline input terminals and Inline output terminals
– Web browser
2.2
Structure of the multiplexer system
Using two SD FLASH 512MB MODULAR MUX SD cards, it is possible to create a multi
-
plexer system consisting of two ILC 131 ETH Inline controllers. You do not need to program
the Inline controllers. Each station of the multiplexer system consists of one Inline controller
including the SD card and the connected Inline terminals. Communication between the two
stations can either be established using an Ethernet cable or a wireless connection.
In order
to be able to communicate via a wireless network, an adapter for wireless communication
is required for each station (e.g., FL EPA 2 adapter).
Both stations can be integrated into an Ethernet network. The multiplexer software that is
installed on the SD card is used to implement the required configuration.
The ordering data for hardware, software, and additional documentation can be found in
