Starting MACX MCR-CONF
104203_en_03
PHOENIX CONTACT
2-9
Change the password for
configuration mode
.
•
Call the MACX MCR-CONF configuration software.
•
Read the active configuration.
•
Enter the password for configuration mode under
Service
→
Locking
(default: 0000).
•
Click on
Service
→
Locking
→
Change.
•
Select a password – not 1234 or 1111.
•
Enter the old password; then enter the new, secure password twice.
Once the password for configuration mode has been changed, the password for
parameterization mode
can also be changed:
•
Enter the password for parameterization mode under
Service
→
Locking
(default: 0000).
•
Click on
Service
Æ
Locking
Æ
Change
.
•
Select a password – not 1234 or 1111.
•
Enter the old password; then enter the new, secure password twice.
If the same password has been selected for both modes, the higher mode
(configuration mode) is started the next time the password is entered.
If different passwords have been selected, only follow the second part of the instructions
above to change the parameterization password.
The new password is only saved to the device when the parameters are
transferred.
Summary of Contents for MACX MCR-CONF
Page 2: ......
Page 8: ...MACX MCR CONF ii PHOENIX CONTACT 104203_en_03 ...