Phoenix Contact ILC 330 Series, User Manual, Page: 93 / 96

6959_en_07 PHOENIX CONTACT
93
B 2 List of tables
Section 2
Table 2-1: Inline controller operating modes ......................................................... 19
Table 2-2: Terminal point assignment ................................................................... 40
Section 3
Table 3-1: Overview of the function blocks ........................................................... 45
Table 3-2: FILE_OPEN function block inputs and outputs .................................... 47
Table 3-3: FILE_CLOSE function block inputs and outputs .................................. 48
Table 3-4: FILE_READ function block inputs and outputs .................................... 50
Table 3-5: FILE_WRITE function block inputs and outputs ................................... 52
Table 3-6: FILE_REMOVE function block inputs and outputs ............................... 54
Table 3-7: FILE_TELL function block inputs and outputs ...................................... 55
Table 3-8: FILE_SEEK function block inputs and outputs ..................................... 57
Table 3-9: FILE_NOTIFY function block inputs and outputs ................................. 59
Table 3-10: Options for the option string ................................................................. 60
Table 3-11: Overview of the function blocks ........................................................... 61
Table 3-12: IP_CONNECT function block inputs and outputs................................. 62
Table 3-13: IP_USEND function block inputs and outputs ...................................... 65
Table 3-14: IP_URCV function block inputs and outputs ........................................ 66
Table 3-15: Error codes for TCP/IP at the STATUS output ..................................... 67
Section 4
Table 4-1: System variables of the status register for local digital inputs
and outputs .......................................................................................... 70
Table 4-2: Variables of the status register for a PROFINET controller .................. 71
Table 4-3: System variables of the diagnostic status register ............................... 73
Table 4-4: Error code (example: 0A50hex) ........................................................... 74
Table 4-5: System variables of the diagnostic parameter register......................... 74
Table 4-6: System variables of the IEC 61131 runtime system ............................. 75
Table 4-7: System variables of the control processor ........................................... 76
Table 4-8: System variable of the control processor
(firmware Version 1.1 or later).............................................................. 76
Table 4-9: System variables of the battery, realtime clock, and memory card ...... 76
Table 4-10: System variables of the power supplies ............................................... 77