Phoenix Contact ILC 330 Series, User Manual, Page: 57 / 96

The Inline controller under PC Worx
6959_en_07 PHOENIX CONTACT
57
Table 3-8 FILE_SEEK function block inputs and outputs
Name Data
type
Data direction Description
Execute BOOL Input Rising edge: block sets the new position of the file pointer.
Handle UINT Input File handle of file in which the position is to be set.
Position DINT Input New position in the file.
Mode UINT Input Positioning mode
0: Positioning relative to start of file.
1: Positioning relative to current position.
2: Positioning relative to end of file.
Done BOOL Output FALSE: The function block was not executed.
TRUE: The function block was executed.
Error BOOL Output FALSE: No errors occurred when setting the position.
TRUE: An error occurred when setting the position.
ErrorID UINT Output Error number of the error that occurred when setting the position:
0: No error information available.
1: Invalid file handle.
13: Invalid positioning mode.
24: The position could not be set.