FL SWITCH EP74…
PHOENIX CONTACT
4057_en_A
2.5
Save the configuration
Save configuration
Phoenix_Contact# write startup-config
Building configuration ...
[OK]
Save configuration to USB
Phoenix_Contact# copy startup-config usb
Restore configuration from USB
Phoenix_Contact# copy usb startup-config
2.6
Software upgrade from USB
1.
Rename sw-pack to “firmware-upgrade.tgz” and copy the file to a USB drive.
2.
Apply power to the FL SWITCH EP74… and wait until system is running.
3.
Insert the USB drive into front panel USB connector.
Phoenix_Contact# firmware upgrade usb firmware_upgrade.tgz
