Configuration and diagnostics
7966_en_04
PHOENIX CONTACT
4-17
Device replacement
“Config Management/Memory Plug” menu
Figure 4-19
“Memory Plug” web page
Configuration using a configuration file is used when replacing devices. To duplicate
devices using a configuration file, observe the following:
–
Create a point-to-point connection between an FL NAT SMN 8TX(-M) and the
management station.
–
Load the configuration file on the FL NAT SMN 8TX(-M).
–
Reset the FL NAT SMN 8TX(-M).
–
Adjust the IP parameters.
–
Save the configuration (“Save current configuration” function).
The duplicated switch can now be operated in the network using the adjusted IP
parameters.
