Operating the CUTFOX 10
102786_en_03
PHOENIX CONTACT
9
English
2.2
Setting up the CUTFOX 10
Figure 2-2
Example for fixing the CUTFOX 10
NOTE:
The device must be set up on a level and horizontal surface.
NOTE: During operation and storage, avoid the following:
–
humid or dusty places and
–
locations exposed to high levels of heat, direct sunlight or low temperatures (operat-
ing range: 15°C ... 35°C).
NOTE:
Set up the CUTFOX 10 so that it cannot slip from its work surface. Use a non-slip
mat or fix the CUTFOX 10 in place, as depicted in Fig. 9 (right).
NOTE:
Do not spill liquids on the CUTFOX 10.
Do not expose the CUTFOX 10 to strong vibrations or shocks.
NOTE:
If the machine is moved from a cold location to a warm location, condensation can
form.
Before using the CUTFOX 10, open the front door and allow condensation to evaporate.
