background image

PHOENIX CONTACT

How to contact us

Internet

Up-to-date information on Phoenix Contact products and our Terms and Conditions can be 

found on the Internet at:

phoenixcontact.com

Make sure you always use the latest documentation. 

It can be downloaded at:

phoenixcontact.net/products

Subsidiaries

If there are any problems that cannot be solved using the documentation, please contact 

your Phoenix Contact subsidiary.

Subsidiary contact information is available at 

phoenixcontact.com

.

Published by

PHOENIX CONTACT GmbH & Co. KG

Flachsmarktstraße 8

32825 Blomberg

GERMANY

Should you have any suggestions or recommendations for improvement of the contents and 

layout of our manuals, please send your comments to

[email protected]

General terms and conditions of use for technical documentation

Phoenix Contact reserves the right to alter, correct, and/or improve the technical documen-

tation and the products described in the technical documentation at its own discretion and 

without giving prior notice, insofar as this is reasonable for the user. The same applies to any 

technical changes that serve the purpose of technical progress.

The receipt of technical documentation (in particular user documentation) does not consti-

tute any further duty on the part of Phoenix Contact to furnish information on modifications 

to products and/or technical documentation. You are responsible to verify the suitability and 

intended use of the products in your specific application, in particular with regard to observ-

ing the applicable standards and regulations. All information made available in the technical 

data is supplied without any accompanying guarantee, whether expressly mentioned, im-

plied or tacitly assumed.

In general, the provisions of the current standard Terms and Conditions of Phoenix Contact 

apply exclusively, in particular as concerns any warranty liability.

This manual, including all illustrations contained herein, is copyright protected. Any 

changes to the contents or the publication of extracts of this document is prohibited.

Phoenix Contact reserves the right to register its own intellectual property rights for the prod-

uct identifications of Phoenix Contact products that are used here. Registration of such in-

tellectual property rights by third parties is prohibited.

Other product identifications may be afforded legal protection, even where they may not be 

indicated as such.

Summary of Contents for BWP 2043W



































Reviews: