PSI-DATA/BASIC-MODEM/RS232
2-4
PHOENIX CONTACT
102906_01_en
2.2
Software Installation
2.2.1
System Requirements
In principle, any device can be connected to the modem via a free V.24 (RS-232) interface.
A terminal program, for example, can be used for configuration. More detailed information
can be found in later sections.
A PC with one of the following operating systems is required for the PSI-MODEM-CONF
configuration software and the plug and play function:
Windows 95, Windows 98, Windows 2000, Windows NT, Windows ME or Windows XP.
2.2.2
Driver Installation
•
Connect the modem to the PC as described above and switch on the supply voltage.
After the PC has been started, the modem is detected automatically and the driver can
be installed:
•
Select "No, not this time" and click "Next".
The installation procedure for the driver varies depending on the operating system. In the
following, driver installation under Windows XP is described as an example. During
installation, please always follow the on-screen instructions.
