Phoenix Contact 2403459, User Manual

Page: 37 / 64

Installation and Commissioning
107460_en_00 PHOENIX CONTACT
37
1. Insert a USB stick into the female connector of the operating device.
2. Press the Restore Backup button.
The backup files are copied from the directory "Backup" to the flash memory of the operat-
ing device.
The successful backup will be confirmed with a dialog.
3. Restart the operating device.
Update Choose Update File
1. Copy a valid firmware update file (FW_xxx.zip) to a USB stick.
2. Insert a USB stick into the female connector of the operating device.
3. Press the Choose Update File button.
A selection dialog box appears.
4. Select the firmware update file.
5. Confirm your selection with the green check.
The select firmware update file is displayed in the field Firmware to install .
Start update
1. Press the button Start update to run the firmware update with the selected file.
A dialog box appears.
2. Confirm your selection with the green check.
The update is carried out automatically. This might take several minutes.
After the update process, a dialog will be displayed.
3. Press the OK button to restart the operating device.
Registry Save Registry
The registry is saved completely.
The process of backup and restore all settings is possible only with identical device types.
NOTICE
Do not interrupt the power supply during the process. After canceling an process, the op-
erating device may not be operational anymore.
Avoid the start of further applications by opening the cockpit directly after a restart. Run-
ning applications can impair the update procedure.
With the appropriate paths, different memory areas of the operating device can be ac-
cessed:
Memory type Path
USB stick \HardDisk\
Internal \FlashDrv\
NOTICE
Do not interrupt the power supply during the process. After canceling an process, the op-
erating device may not be operational anymore.